|
Things to know:
Familarise yourself with the location
of the car jack the spare tyre and the
Locking wheel nut tool (if fitted with lock nuts) before you need to use
them in
a real situation.
Ensure that you have a wheel brace as well as a properly inflated spare tyre
How to fit The Boot
Buddy
METHOD 1:
Screw the female end of the hose to your spare tyre valve
Lay the hose under the boot carpet and then drill a hole
big enough to allow the valve stem to pass through in the
rear of the boot. If in doubt have this done by a professional.
METHOD 2:
Alternatively you can fit the Boot
Buddy by screwing the female
end onto the spare tyre valve and laying the other end on the floor
of the boot under the carpet. In this way the spare tyre does not
have to be unbolted and removed to be inflated
|
